LEO-6050P
Aging Test Oven
Ideal for test of Rubber, Resin plastic Electronic Parts
- Adjustable Air Vent System
- Temperature Control up to 250°C and 350°C
- Microprocessor PID Temperature Controller
- 10 step program temperature and time, 999 cycle
- Complete sealed stainless steel chamber
- High efficiency, High clean Mechanism
- Rapid heat-up time 30 minutes to 250°C
- Filter air supply and ventilation
- Forced air circulation by sirocco fan
- Fully equipped with safety device and alarm
- Built-in removable geared rotator controlled by feedback control motor from 0 to 10 rpm
Programmable Controller (Optional PC Interface)
- 10 Step Microprocessor PID Program Controller RS-232/485 PC Interface
- Monitoring 16 Unit Connected into 1 Computers with Labtech Hub Software
- Graphic monitoring for step programmed process of time and temperature on real-time
Specification
MODEL |
LEO-6050P |
LEO-6150P |
Controller |
Microprocessor
PID Program Controller with alarm system |
|
Dimension
Inner (W x
D x H mm) Outer |
500
x 500 x 600 700
x 800 x 1600 |
|
Timer |
99min
59 sec. / 99hr 59 min / Continuous Selectable |
|
Temp Range Set
Accuracy Uniformity |
Ambient
+ 15°C to 250°C (Option up to 350°C) ±
1.0°C ±
3.0°C at 120°C |
|
Speed
Range Control |
0 to
10 rpm Electronic
Feed Back Controller |
|
Rotator |
Ø200
Stainless Steel Plate x 2EA |
|
Circulation |
Ø120
x 100mm Sirocco Fan |
|
Material
Interior
Exterior |
Stainless
Steel Epoxy
powder coated EGI Steel |
|
Electric
Supply |
220V
or 380V 3 Ph 4 line, 50/60Hz |