Multi Growth Chamber LGC-2101D

LGC-2101D

Multi Growth Chamber

Microprocessor PID Control

Provides high precision temperature, relative humidity, illumination and CO2 control for uniform and stable growth environment

10 Step Program with PC Interface (Option)

Controller provides automatic operation of various programmed cycles and maximum 999 cycles PC software for monitoring and data logging

Self-Diagnostic and Alarm system

Automatically check any malfunction or errors and visible alarm system

Forced Air Circulation System

Silent and durable fan motor to maintain uniform temperature and humidity by air circulation from down to top air flow direction

None-CFC/HCFC Refrigeration System

CFC / HCFC-free Hermetically sealed compressor and eco- friendly refrigerated gas are used for compliance with the New Environment Regulator

Lamp-on-Delay System

Protects plants from stress by preventing sudden change of light strength and switch on / off time control

Automatic water supply System

Distilled water or de-ionized water with water purifier is supplied by built-in reservoir at chamber

Technical Design and Structure

Complete sealed stainless steel chamber with light transferable inner tempered safety glass door with solid out door built-in light bank

Light Bank System (Option)

With 8 step Programmable control up to 35.000 Lux available various lamp selection

Lab-Dog DVR System (Option)

Video recording and monitoring with internet system

Dual Chamber Structure

MODEL	LGC-2101D	LGC-2102D
Dimensions Inner (wxdxh mm) Outer	650 x 600 x 600 x 2 rooms 1238 x 880 x 1970	982 x 580 x 500 x 2 rooms 1830 x 860 x 1970
Capacity	234 ℓ x 2 room, 468 ℓ	285 ℓ x 2 room, 570 ℓ
Display	LCD Back Light PV & SV Display
Controller	Microprocessor PID Program Controller with Alarm System / 10 step program, 999 cycle
Temperature	Range 0°C to 60°C (Light Off) / 10°C to 60°C (Light On) Set Accuracy ±0.1°C / Uniformity : ±1.0°C at 20°C
Heater	4 kW
Compressor	1 HP	1 HP
Humidity	Range 30% to 98% RH Set accuracy ± 1% / Uniformity: ± 2% to 3% at 60% RH Evaporation by fan with Heater (Optional: Ultrasonic Humidifier)
Material Interior Exterior	Stainless steel 304 Epoxy powder coated EGI Steel
Illumination Range Sensor	0 to 25.00 Lux (Optional 35.000 Lux) Photo sensor with Flexible Cable
Door	Tempered safety glass door with silicon packing Magnetic packing solid door
Electric Supply	110V 60Hz or 220V 50/60Hz

*Remark: Temp 0°C can be reacted without lighting *Option: Light bank under each shelf, LED special Lamps