Steam Sterilizer Class B Sterilization

Steam Sterilizer

Class B Sterilization. Pre Post Vacuum System

Feature

Sterilization temperature 110°C to 135°C EN-13060-2 class B sterilization cycle

Pre Vacuum-water filling-heating-sterilizing-ventilation-post vacuum drying-end cycle

Pre-vacuum and post vacuum Drying system

Pre-vacuum for effective air removal that results in increasing sterilization performance

Post-vacuum for drying with remaining steam removal

Microprocessor PID program controller with self auto-tuned and LCD monitor

7 pre-programmed cycles as 2 wrapped, 2 unwrapped liquid, Bowie-disk and 1 user programmable.

Full automatic operation system

Easy operation with full automatic cycle by microprocessor, from beginning to end cycle.

Self-diagnostic and Safety system

In case of any malfunction, it alarms and displays error codes for easy maintenance, being stop working with automatic ventilation process for safety purpose

Air filtration cooling system

For the process of drying cycle, 0.2µm HEPA filtered clean air flows into the chamber in order to protect air contamination and cool down below 60°C

Flushing cycle sterilization system

Can be supplied as operational order

Safe and Efficient water supply system

Automatic water supply mechanism which supplies fixed volume of water to the chamber

for maximum efficiency

Automatic and manual door lock system

When the sliding handle is entered into the locking ring, the door automatically locks after two second.

The door can be manually opened and locked using the locking wheel system.

Space saving compact design

Maximize working capacity with square chamber and minimize foot space with dedicated engineering design.

Safety Mechanism

- Over pressure release valve

- Over temperature protector with Thermostat

- Higher temp set protector by Digital high alarm limit

- Visible and Audible alarm system

- Automatic dual door locking system

Specificaion

MODEL	LAC-1011SV	LAC-1021SV	LAC-1031SV
Dimensions Inner (W x D x H mm) Outer	410 x 560 x 345 200 x 300 x 200	490 x 655 x 460 270 x 405 x 230	510 x 755 x 545 300 x 455 x 300
Capacity	12 Liter	25 Liter	40 Liter
Heater	2 kW	2.5kW	3kW
Chamber Type	Reinforced and Electro polished square chamber
Material	Stainless Steel 304 standard (STS 316 L option)
Door Lock Mechanism	Automatic wheel inter locking with one touch sliding handle
Vacuum Pump	Built-in diaphragm vacuum pump 25 LPM capacity
Controller	Microprocessor PID Program Controller with LCD Monitor
Sterilization Temp. Range Pressure Range Course	110°C - 135°C 0.4-2.3kgf/cm² Unwrapped 1&2/ Wrapped 1&2/ Liquid/ Bowie-Dick/ User Program mode
Reservoir	6 L stainless steel tank with top water filling inlet and silicon closer
Safety	Over pressure release valve, Over temperature Visible and Audible alarm system, Automatic dual door locking system
Tray	180 x 260 mm	250 x 360 mm	290 x 400 mm
Tray	Wire tray (Standard) / Perforated tray (Option)
Electrical Supply	110V, 60Hz or 220V, 50/60Hz