Steam Sterilizer Class B Sterilization Pre & Post Vacuum system

Steam Sterilizer

Class B Sterilization. Pre & Post Vacuum system

Pre-vacuum and post vacuum Drying system

Pre-vacuum for effective air removal that results in increasing sterilization performance.

Post-vacuum for drying with remaining system removal

Microprocessor PID program controller with self auto-tuned and LCD display

3 pre-programmed (wrapped, unwrapped, liquid course) and 1 Bowie-dick test and 1 user manual mode

Full automatic operation system with working process cycle LED indicator

Easy operation with full automatic cycle by micro processor, from beginning to end cycle

Sterilization temperature 110°C to 135°C EN-13060-2 /EN -285 class B sterilization

Pre-vacuum-water filling-heating-sterilizing-ventilation-post vacuum drying-end cycle

Self-diagnostic and safety system

In case of any malfunction, it alarms and displays error codes for easy maintenance, being stop working with automatic ventilation process for safety

MODEL	LAC-5045SP	LAC-5065SP	LAC-5085SP	LAC5105SP
Sterilization Class B	Built-in pre-vacuum system & post vacuum drying system
Dimensions Outer (W x D x H mm) Inner	770x560x900 Ø350x240	770x560x1000 Ø350x630	860x650x950 Ø450x500	860x650x1100 Ø450x630
Capacity	40ℓ	60ℓ	80ℓ	100ℓ
Reservoir Capacity	10 ℓ	12 ℓ	14 ℓ	16 ℓ
Material Exterior Chamber	Heavy-Duty Epoxy Resin powder coated EGI steel Stainless steel 304 (STS 316 L option)
Heater	3kW + (Dry 1kW)*	3kW + (Dry 1kW)*	5kW + (Dry 1kW)*	5kW + (Dry 1kW)*
Sterilization Temperature	110°C - 135°C (Max)
Pressure Range	0.4 – 2.3kgf/cm²
Dry System	Post vacuum to remove steam vapor / 0-60 min
Vacuum/Pressure Gauge	-0.1 ~ 0.4Mpa (760mmHg – 4kgf/cm2)
Controller	Microprocessor PID Program Controller with LCD Monitor
Operation Cycle Mode	3 Programmed cycle, 1 Bowie-Dick test, 1 User men
Pre & Post Vacuum System	Diaphragm vacuum pump 50 LPM capacity
Display	LCD monitor (Temperature, Timer, Program cycle) LED indicator (Water, Heat, Sterilization, Dry, End cycle)
Timer	4-90 min Sterilization & 1-90 min Dry time
PC Communication	RS-232C interface (Option)
Door	Heavy Duty Hinged up & down door
Safety Device	Over pressure safety valve, Over temperature / Over heating and over temperature protector Door open sensing & power cut – off, Low water prevention device / Leakage & Over current circuit breaker
Standard Basket	2 ea of stainless wire basket included
Electric supply	110V, 60Hz or 220V, 50/60Hz